SMOORE流塘工业园改造

China
external view of the project
Photo © Chao Zhang
location
Picture © CM Design
external view of the buildings before renovation
Photo © CM Design
external view of the buildings before renovation
Photo © CM Design
external view of the buildings before renovation
Photo © CM Design
external view of the buildings before renovation
Photo © CM Design
exploded axonometric
Picture © CM Design
elevation of the production building
Photo © Chao Zhang
closer view to the building remaining the colorful mosaic facade on the second floor and above
Photo © Chao Zhang
inner courtyard and building facade
Photo © Chao Zhang
aluminum meshes used between the two buildings
Photo © Chao Zhang
outdoor square
Photo © Chao Zhang
narrow strip between the two buildings
Photo © Chao Zhang
mesh panel units with different angles
Photo © Chao Zhang
mesh panel units with different angles
Photo © Chao Zhang
passageway the production building and the outside space
Photo © Chao Zhang
passageway the production building and the outside space
Photo © Chao Zhang
entrance hall of the office area
Photo © Chao Zhang
office area
Photo © Chao Zhang
night view
Photo © Chao Zhang
site plan
Picture © CM Design
first floor plan
Picture © CM Design
second floor plan
Picture © CM Design
third floor plan
Picture © CM Design
fourth floor plan
Picture © CM Design
fifth floor plan
Picture © CM Design
elevations
Picture © CM Design
section
Picture © CM Design
details
Picture © CM Design
Architects
CM Design
Location
518000 China
Year
2020
Team
厘米制造

SMOORE Liutang Industrial Park locates in Xixiang Street, Baoan District, Shenzhen, at the northeast corner of the Liutang Park and adjacent to the Christian Baoan Church. The project covers an area of 5,017 square meters, and has a total floor area of 13,658 square meters, including 6,260 square meters in Building 2 and 7,398 square meters in Building 3. In the 1980-90s, a large number of small and medium-sized manufacturing plants came out in this area, which however, has been gradually surrounded by new residential communities, parks, offices, and related infrastructures due to the rapid process of urbanization. As a result, the area has changed from the outskirt of the city to the center, production workshops began to move away, and the old industrial buildings were facing urban renewal and function upgrade.

The design needs to form a new relationship between the buildings. The industrial park consists of two separate factories, walls between them were removed to form a pedestrian loop in the park. A roadway through the bottom of Building 1 connects the two sites closely, creating an interconnected and convenient freight network.

The characteristics and materials of the original buildings were carefully preserved. New design elements were applying to the ground floor, passage facade, and windows to contrast and resonate with the preserved building, which was also a response and respect to the original texture. The first floor is the equipment storage and mechanical loading area, rust steel plate was used on the wall as a skin for protection. A trumpet-shaped entrance was built into Building 1 as a public area for trucks to pass and load goods, connecting the two sites of the park.

The most featured colorful mosaic facade on the second floor and above remains in use after cleaning and restoration. As an important component of the facade, renovation of the windows had to simultaneously maintain their original dimensions and show a new image. Original windows were replaced by different angled windows, with which dynamic scenes of the city could be portrayed and reflected from various directions, presenting a wide variety of facade forms. The design did not conform to the usual stereotype of an industrial park, giving the buildings vitality and more expression.

As a symbol of SMOORE’s atomization technology, the "Fog Valley" was put into the narrow strip between the two buildings, which were both covered by a curtain wall composed of aluminum meshes, became the landmark of the park. Six kinds of mesh panel units with different angles were customized due to indoor lighting and sight view requirements, greatly reduced the construction difficulty and cut down the cost.

The wall on the north side of the park was removed to form an outdoor square. The single-story dilapidated building at the edge was reinforced and converted into electric room and garbage station. A completely new boundary of the park was integrated with the facade of the first floor of the buildings. Badminton and basketball fields as well as rest stools were arranged in the site to provide a leisure and fitness place for the employees.

The project was an exploration of the urban industrial buildings reuse at a low cost. Preservation, restoration, intervention, and superposition of different architecture forms, materials, and textures in different eras under the languages that emphasize functionality, leave a memory for the rapid development of the city, and make the current urban industrial buildings more thickness and continuous.
Materials
Steel Panel (Dongguan Zaoxin Metal Materials Co., LTD.),
Brick (Dongguan Tianrun Building Materials Co., LTD.),
Glass (Dongguan Boye Glass Co., LTD.),
Aluminum Mesh (Shanghai Red Green Metal Products CO., LTD.),
Coating (Dongguan Xingyu Chemical Coating Co., LTD.)
Contact Email: cmdesign-sz2016@qq.com
Architects
CM Design
Location
Baoan, Shenzhen, China
Design Team
Jun Liao, Danping Chen, Heng Yang, Musen Li, Mingming Yao, Yingchuan Zhong, Jing Zhao, Shihua Long, Jinyao Liu (intern)
Site Area
5017 sqm
Floor Area
13658 sqm
Project Year
2019.9-2020.5
Developer
SMOORE International Holdings Limited
Contractor
Dongguan Guanjiang Decoration Design Engineering Co., Ltd.
Photographs
Chao Zhang

Related Projects

  • Shanghai Suhe MixC World
    KOKAISTUDIOS
  • Welcome to the Stage!
    Kjellander Sjöberg
  • Hovering Kan-Too – Great Bay Area Center Showroom
    Wutopia Lab
  • Stockwell-Rodríguez Residence
    Belmont Freeman Architects
  • Haunsbergstraße | 1. Preis
    Architektinnen Schremmer.Jell ZT GmbH

Magazine

Other Projects by CM Design

金威啤酒厂工业遗存改造设计国际竞赛
公园礼盒
China
SMOORE工业园改造
China
城中村-村中巷:十点创意饮品店
Shenzhen, China
Renovation of SMOORE Headquarters Industrial Park
China